The HS series comprises a 50mm (2") has a solid cast aluminium body, cast iron pump casing and an impact-resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where water contains sand and silt in suspension, thus maintaining performance and reliability. The HS2.4S has a 403 stainless steel shaft, that is fitted with an ultra hardwearing, silicon carbide, double mechanical seal (in an oil chamber), and have a stirring device to reduce blockages.  Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, H07RN-F rubber power cable. 

 Click Here For Detailed Technical Specifications

The new 80mm model (HS3.75S) offers substantial increases in head and flow capability compared to the HS2.4S. The pumps have a solid cast aluminium body, cast iron pump casing and an impact-resistant PVC strainer base for durability during robust handling. The urethane vortex impeller offers excellent wear resistance in site applications where water contains sand and silt in suspension, thus maintaining performance and reliability. The HS3.75S features an oil lifter to maintain seal lubrication during operation in any position. Both models have a 403 stainless steel shaft, that is fitted with an ultra hardwearing, silicon carbide, double mechanical seal (in an oil chamber), and have a stirring device to reduce blockages. Used predominantly as contractor pumps on site drainage duties, they can also be used in other industrial applications. Supplied with 10 metres of heavy duty, H07RN-F rubber power cable.

 Click Here For Detailed Technical Specifications

The LB 480 and LB 800 submersible pumps are extremely robust, compact contractor pumps, that have a 50mm / 2" outlet and a tough pressed steel strainer base and body.  They offer excellent durability during periods of continuous use and/or operator abuse.   The LB480 & LB800 models incorporate a dual position outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking. A choice of either 0.48kW or 0.75kW motors in the range facilitate cost effective pump selection. A combination of a rubber pump chamber and a urethane vortex impeller provides excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability.  Both models use a 403 stainless steel shaft that is fitted with an ultra hardwearing, silicon carbide, double mechanical seal, (in an oil chamber), with an oil lifter to maintain seal lubrication during operation in any position. This feature, combined with the water and air cooling route to the top outlet, allows the pump to operate for extended periods with little or no water. Considered the "hire industry standard", earlier models have been used in this trade since the mid-70’s. Supplied with 10 metres of heavy duty, H07RN-F rubber power cable. 

 Click Here For Detailed Technical Specifications

The Tsurumi LSC1.4S pump succeeds the famous LSC4, which was the original "puddle sucker" or "puddle pump". It is able to pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces.  This new, updated, model incorporates a dual position 1"; outlet port, to enable the user to position the outlet hose horizontally or vertically and avoid it kinking; 50mm(2") is also available, as an optional extra. For improved durability, during robust handling, it has a pressed steel outer casing and a cast aluminium pump stand to offer increased protection of the steel and rubber base plate. A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability. An additional feature is an integral swing check valve to prevent back flow of water from the discharge hose.  Quality is further enhanced with a 403 stainless steel shaft that is fitted with an ultra hardwearing, silicon carbide,  double mechanical seal (in an oil chamber), and an oil lifter to maintain seal lubrication during operation in any position. This feature, combined with the water and air cooling route to the top outlet, allows the pump to operate for extended periods with little or no water. For precise water level control a probe system is an optional extra (see page 39). This system can switch the pump on at a water depth of 12mm+ and switch it off at 5mm. Used widely by hire outlets, utilities and flood control companies. Supplied with 10 metres of heavy duty, H07RN-F rubber power cable. 

 Click Here For Detailed Technical Specifications