Obart Pumps
Company
Home Page
About Us
Latest News
Current Promotions
Products
Submersible Pumps
(Single Phase)
Submersible Pumps
(3 Phase)
Meters & Controls
Surface Pumps
Engine Driven Pumps
Diesel/Oil Transfer Pumps
Hand Pumps
Pressure Washers
Hoses & Fittings
Flood Protection
Special Offers
Services
Our Services
Reference Data
Unit Conversions
Online Catalogue
Search Our Catalogue
Browse Catalogue
Contact Us
Contact Details
General Enquiry
Request Callback
Catalogue Request
Account Application
How to Find Us
Trouble Shooter
Fault Diagnosis
Printable Version
Submersible (Single Phase)
Results: 13 - 16 of 37 matches found.
SMC1003HL - Wells - Thermoplastic

The SMC1003HL is a multi-stage pump and is intended for domestic and light industrial applications. Fitted with thermoplastic diffusers and impellers, it has a stainless steel shaft and this is fitted with a single mechanical seal in carbon. It has an integral starting capacitor and an adjustable level control float switch. It is not recommended for operation against the closed valve of a tap or a nozzle. It is supplied with 10 metres of heavy duty rubber power cable and 20 metres of lifting rope. The maximum depth of submersion is 8 metres.

Industry
Irrigation
Potable Water
Spraying
Wells & Boreholes
 
Model
Part Num
Flow (l/min)
Head (mtrs)
kW
Manual / Auto
Outlet
Size (mm)
Voltage
Well Size (mm)
Status
Each
Buy
SMC1003HL
S-SMC1
115
34
0.90
A
1"
150x170x410
230
350+
In Stock
£126.65
Add To Cart
DIVERTRON / e-deep - Boreholes

The Divertron is a multi-stage pump, with integral electronics for sophisticated, high head use in domestic and industrial applications. Portable, high head automatic pump constructed in a composite of high quality engineering plastics. This pump is designed for clean water applications only. The unique product is programmed to start and stop automatically when a valve or tap is opened or closed, while another programme will stop the pump automatically, in the event of dry running, thus protecting it from severe damage. It can be used for aperation against the closed valve of a tap or a nozzle, hence it is ideal for sprinkling and washing applications. it has a stainless steel shaft and this is fitted with a lip seal. It has an integral starting capacitor, a non-return valve and it is supplied with 15 metres of H07RN-F rubber power cable. The maximum depth of submersion is 15 metres.

Irrigation
Potable Water
Transfer
Water Harvesting
 
Model
Part Num
Flow (l/min)
Head (mtrs)
kW
Manual / Auto
Outlet
Size (mm)
Voltage
Weight (kg)
Well Size (mm)
Status
Each
Buy
Divertron
L-D10002
95
36
0.90
A
1"
Ø155x450
230
11.00
200
In Stock
£339.15
Add To Cart
GR Grinder - Unscreened Sewage - Grinder - Cast iron

The GR series grinder pumps are of cast iron construction. They are used in sewage stations and for servicing individual, or groups, of houses where drainage by gravity is not possible. They are ideally suited to applications where effluent is required to be pumped over a long distance, through a small bore pipe. A special cutting device achieves up to 69,000 cuts per minute, readily pulverising suspended solids. Non-destructible solids, which cannot be cut, are thrown back. The high heads produced, with only limited horsepower motors, also make them suitable for agricultural disposal systems that feed sprinklers. In industrial applications they are used for pumping fibrous material. A float switch is fitted as standard on single-phase models. The 420 stainless steel shaft has a double mechanical seal (in an oil chamber). Supplied with 10 metres of heavy duty, H07RN-F rubber power cable.

Domestic, Commercial & Industrial
Packaged Pumping Stations
Treatment Plants
 
Model
Part Num
Flow (l/min)
Free Passage (mm)
Head (mtrs)
kW
Manual / Auto
Outlet
Size (mm)
Voltage
Weight (kg)
Status
Each
Buy
Grinder
GR1002MA
260
7
20
0.90
A
1½"
163x210x360
230
21.00
In Stock
£573.75
Add To Cart
Grinder
GR2002MA
405
7
23
1.70
A
2"
222x275x410
230
32.00
In Stock
£1,065.05
Add To Cart
HD-15 - Site Drainage - Stainless Steel

The HD15 offers a huge flow from a relatively small single phase motor and it has been designed specifically for use as a contractor’s pump in site applications where the water contains sand and silt in suspension. For this use, the 1.15kW motor is supplied in 110volts and will use a 16amp plug connection. For other applications, it is also supplied in 230 volts and it will use a 13amp plug connection, consequently it is suitable for continuous running applications in large ponds and water features. For added convenience, cumbersome external control boxes are not required because the design features an integral capacitor and motor protection. To withstand the rigours of site use, water features etc. the impeller, suction cover and pump casing are constructed in wear resistant ductile iron and the motor frame is in 304 stainless steel. The motor head cover is in regular cast iron. The 410 stainless steel shaft is fitted with an ultra hardwearing, silicon carbide, double mechanical seal (in an oil chamber). Supplied with 10 metres of heavy duty rubber power cable.

Construction
Hire Fleets
Mining
Quarries
Utilities
Water Features
 
Model
Part Num
Flow (l/min)
Free Passage (mm)
Head (mtrs)
kW
Manual / Auto
Outlet
Size (mm)
Voltage
Weight (kg)
Status
Each
Buy
HD-15
HUP-HD101M
830
9
10
1.15
M
80
190x310x505
110
25.40
In Stock
£377.40
Add To Cart
HD-15
HUP-HD102M
830
9
10
1.15
M
80
190x310x505
230
25.40
In Stock
£377.40
Add To Cart
HD-15A
HUP-HD101AP
830
9
10
1.15
A
80
190x310x505
110
26.10
In Stock
£400.35
Add To Cart
HD-15A
HUP-HD102AP
830
9
10
1.15
A
80
190x310x505
230
26.10
In Stock
£400.35
Add To Cart
Pages: 1 2 3 [4] 5 6 7 8 9 10