Pumps We Sell

Submersible pumps

Submersible pumps are designed to be used fully submerged under water. They are simple to use and reliable in operation, because only a discharge pipe is required so priming is unnecessary. All our submersibles are electric with perfectly sealed motors, close coupled to the pumping chamber to ensure safe operation when pumping liquids. Our range covers all the common voltages: 12V, 24V, 110V, 230V, 400V and both currents:  alternating current (AC), for use in domestic and industrial applications, and direct current (DC) for use with batteries. AC motors operate with a mains frequency of 50Hz. Alternative voltages and frequencies are available (price on application)

 

Surface pumps

Surface pumps are designed to be used out of water. All pumps in this category are electric and they have motors rated from IP44 to IP55 to indicate the level of protection from dust and liquids. They require inlet and outlet pipe and most, but not all, require priming initially. Our range covers all the common voltages: 12V, 24V, 110V, 230V, 400V and both currents:  alternating current (AC), for use in domestic and industrial applications, and direct current (DC) for use with batteries. AC motors operate with a mains frequency of 50Hz. Alternative voltages and frequencies are available (price on application)

 

Engine pumps

Engine pumps are designed to be used out of water and must not be used inside buildings or partially enclosed areas. Powered by petrol or diesel, pump end options are either centrifugal or diaphragm. Both require inlet and outlet pipe, however, a centrifugal requires priming initially to self-prime and should not run without water. A diaphragm pump does not need priming and it can run dry.

 

Hand pumps

Hand pumps are designed to be used out of a liquid. Combining human power and mechanical advantage to move liquids, the range offered has inlet and outlets designs that are fixed or flexible. The range covers applications that are portable, temporary or permanent.

 

Diesel transfer pumps

Diesel transfer pumps are range of pumps and accessories for the pumping of red, white and bio diesel only. The surface pumps are designed for use out of the diesel liquid, require inlet and outlet pipe, and can be operated with a trigger nozzle. The submersibles are designed to be fully submerged. Our range covers all the common voltages: 12V, 24V, 110V, 230V, 400V and both currents:  alternating current (AC), for use in domestic and industrial applications, and direct current (DC) for use with batteries. AC motors operate with a mains frequency of 50Hz.

 

AdBlue pumps

AdBlue pumps are a range of pumps and accessories for the pumping of Adblue and water only. The surface pumps are designed for use out of the Adblue liquid, require inlet and outlet pipe, and can operate with a trigger nozzle. Our range covers all the common voltages: 12V, 24V, 110V, 230V and both currents:  alternating current (AC), for use in domestic and industrial applications, and direct current (DC) for use with batteries. AC motors operate with a mains frequency of 50Hz.

 

Oil transfer pump

Oil transfer pumps are designed to pump oils and lubricants, for surface use only. Available with these common voltages and currents: 110V, 230V and 400V, alternating current (AC), for use in domestic and industrial applications. AC motors operate with a mains frequency of 50Hz.